ESP8266 WiFi Cyanne selection

zsirjames · July 29, 2017, 7:41pm

I cannot seem to comple any of the Cayanne examples on my Thing DEV so it will not connect to the web site because none of the examples compiles with out error because the wifi selection is wrong.

which one of these examples work or what wifi selection must I add? ?

rsiegel · August 10, 2017, 3:34pm

Hi @zsirjames,

Have you tried adding your Thing Dev board with as a ‘Bring Your Own Thing’ device with this sketch?

github.com

myDevicesIoT/Cayenne-MQTT-ESP/blob/master/examples/ESP8266/ESP8266.ino

// This example shows how to connect to Cayenne using an ESP8266 and send/receive sample data.
// Make sure you install the ESP8266 Board Package via the Arduino IDE Board Manager and select the correct ESP8266 board before compiling. 

//#define CAYENNE_DEBUG
#define CAYENNE_PRINT Serial
#include <CayenneMQTTESP8266.h>

// WiFi network info.
char ssid[] = "ssid";
char wifiPassword[] = "wifiPassword";

// Cayenne authentication info. This should be obtained from the Cayenne Dashboard.
char username[] = "MQTT_USERNAME";
char password[] = "MQTT_PASSWORD";
char clientID[] = "CLIENT_ID";

unsigned long lastMillis = 0;

void setup() {
	Serial.begin(9600);

This file has been truncated. show original

Topic		Replies	Views
NodeMCU ESP8266 - Not posible to connect WIFI Helped	9	5095	August 9, 2017
Undifined reference to 'ESP8266: Helped	5	1562	January 5, 2021
New Cayenne Support: ESP8266 as a WiFi Shield! Announcements	2	7108	December 8, 2017
Esp8266-12e MQTT sketch wont compile Helped	4	2298	May 31, 2020
ESP8266 with Cayenne Community Help With My Project	15	4173	December 9, 2016

ESP8266 WiFi Cyanne selection

Related topics