RuntimeError: failed to add edge detection

Raspberry Pi 3B+, Web dashboard

My project comunicates an arduino trhough sx1278 modules to a Raspberry Pi 3B+, it worked perfectly (at least it printed the data into the python shell) until I registred the Rp to the Cayenne dashboard, after that I get the error in the tittle, my project is very similar to this one:

https://iotdesignpro.com/projects/wireless-communication-between-arduino-and-raspberry-pi-using-lora-module-sx1278
but I added some sensors. help me please.
I already made a clean install of raspbian so I know the problem starts exactly at the moment I register the raspberry pi to Cayenne.

the complete error:
/home/pi/Desktop/bkupWf/SX127x/board_config.py:61: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings.
GPIO.setup(BOARD.LED, GPIO.OUT)
/home/pi/Desktop/bkupWf/SX127x/board_config.py:62: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings.
GPIO.setup(BOARD.RST, GPIO.OUT)
Traceback (most recent call last):
File “/home/pi/Desktop/bkupWf/gui_test2.py”, line 62, in
lora = LoRaRcvCont(verbose=False)
File “/home/pi/Desktop/bkupWf/gui_test2.py”, line 20, in init
super(LoRaRcvCont, self).init(verbose)
File “/home/pi/Desktop/bkupWf/SX127x/LoRa.py”, line 95, in init
BOARD.add_events(self._dio0, self._dio1, self._dio2, self._dio3, self._dio4, self._dio5)
File “/home/pi/Desktop/bkupWf/SX127x/board_config.py”, line 105, in add_events
BOARD.add_event_detect(BOARD.DIO0, callback=cb_dio0)
File “/home/pi/Desktop/bkupWf/SX127x/board_config.py”, line 101, in add_event_detect
GPIO.add_event_detect(dio_number, GPIO.RISING, callback=callback)
RuntimeError: Failed to add edge detection

https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=226053&p=1387758#p1387758