Trigger events limitation, web not firmware solution

[Idnas]

I’ve read this and similar topics.

Sending MQTT messages within notification limit

notification trigger (SMS and email) are currently limited to 90 per day. the trigger activates every time the device publish a message above the set threshold. To avoid publish message flood and causing the trigger to run continuously and hit the 90 limit quickly use the following code for sending only once notification trigger when the threshold is crossed. For actuator trigger, there is no limit and there is no need to use the code but it is good practice to use as it. Using Cayenne-MQTT-Ard…

It’s a little difficult to reload the firmware in, say, ESP32 when needs change.
A limit on the number of events via the web interface would be very welcome. For example, a limit per minute, hour, day, or week. Sometimes events are triggered and before we notice it, the mailbox is filled with hundreds of emails.

For example, in my case, I am interested in when the spring soil temperature reaches the conditions for the growth of fungi.